Siguiendo la estela de este antiguo post, en que movíamos manualmente las carpetas de iis a otro destino. He decidido hacer un script que nos haga este cambio sin tener que hacerlo manualmente.
el script esta basado en estos3 enlaces:
https://technet.microsoft.com/en-us/library/jj635855(v=ws.11).aspx
http://blogs.iis.net/thomad/moving-the-iis7-inetpub-directory-to-a-different-drive
https://support.microsoft.com/en-nz/kb/2752331
el script es este:
<#
.Synopsis
Moves the Default IIS Directory to another drive
.DESCRIPTION
Moves the Default IIS Directory to another drive
Configure-IISMove IIS based on these three links:
https://technet.microsoft.com/en-us/library/jj635855(v=ws.11).aspx
http://blogs.iis.net/thomad/moving-the-iis7-inetpub-directory-to-a-different-drive
https://support.microsoft.com/en-nz/kb/2752331
.EXAMPLE
Configure-IISMove -Drive H
.EXAMPLE
#>
<#
PLEASE BE AWARE: SERVICING (I.E. HOTFIXES AND SERVICE PACKS) WILL STILL REPLACE FILES
IN THE ORIGINAL DIRECTORIES. THE LIKELIHOOD THAT FILES IN THE INETPUB DIRECTORIES HAVE
TO BE REPLACED BY SERVICING IS LOW BUT FOR THIS REASON DELETING THE ORIGINAL DIRECTORIES
IS NOT POSSIBLE.
#>
[CmdletBinding()]
[OutputType([int])]
Param
(
# Param1 help description
[Parameter(Mandatory=$true,
ValueFromPipelineByPropertyName=$true,
Position=0)]
$Drive
)
Begin
{
$DoesDriveExist= $null
#Lets see if the drive exists and the drive is not a mapped drive
$DoesDriveExist = get-psdrive | where {($_.name -eq $drive) -and ($_.root -eq ($drive+":\"))}
if ($DoesDriveExist ) #If it exists and the drive is not a mapped drive carry on , otherwise error
{
Write-Verbose "$drive drive exists"
}
else
{
Write-error "$drive drive does not exist or may be a mapped drive "
exit
}
#Lets backup the web Configuration before we do anything
Write-Verbose "Backing up IIS configuration"
Backup-WebConfiguration -Name "Backup Before IIS Hardening"
}
Process
{
#Stop IIS services
#Because stopping these service also stops the services that depend on them check the dependant services on each service and stop them first
#e.g. get-service iisadmin | format-list -property name, dependentservices
stop-service w3logsvc
stop-service W3SVC
stop-service iisadmin
<#
REM Copy all content
REM /O - copy ACLs
REM /E - copy sub directories including empty ones
REM /I - assume destination is a directory
REM /Q - quiet
REM echo on, because user will be prompted if content already exists.
#>
xcopy $($env:SystemDrive+"\inetpub") $($Drive+":\inetpub") /O /E /I /Q
<#
#Move AppPool isolation directory
#>
Write-Verbose "Creating Registry entries"
push-location
#reg add HKLM\System\CurrentControlSet\Services\WAS\Parameters /v ConfigIsolationPath /t REG_SZ /d d:\inetpub\temp\appPools /f
Set-Location "HKLM:\System\CurrentControlSet\Services\WAS\Parameters"
set-ItemProperty . -name ConfigIsolationPath $($Drive+":\inetpub\temp\appPools")
#REM Make sure Service Pack and Hotfix Installers know where the IIS root directories are
Set-Location "HKLM:\Software\Microsoft\inetstp"
#reg add HKLM\Software\Microsoft\inetstp /v PathWWWRoot /t REG_SZ /d %MOVETO%inetpub\wwwroot /f
set-ItemProperty . -name PathWWWRoot $($Drive+":\inetpub\wwwroot")
#reg add HKLM\Software\Microsoft\inetstp /v PathFTPRoot /t REG_SZ /d %MOVETO%inetpub\ftproot /f
set-ItemProperty . -name PathWWWRoot $($Drive+":\inetpub\ftproot")
#REM Do the same for x64 directories
Set-Location "HKLM:\Software\Wow6432Node\Microsoft\inetstp"
#if not "%ProgramFiles(x86)%" == "" reg add HKLM\Software\Wow6432Node\Microsoft\inetstp /v PathWWWRoot /t REG_EXPAND_SZ /d %MOVETO%inetpub\wwwroot /f
set-ItemProperty . -name PathWWWRoot $($Drive+":\inetpub\wwwroot")
#if not "%ProgramFiles(x86)%" == "" reg add HKLM\Software\Wow6432Node\Microsoft\inetstp /v PathFTPRoot /t REG_EXPAND_SZ /d %MOVETO%inetpub\ftproot /f
set-ItemProperty . -name PathWWWRoot $($Drive+":\inetpub\ftproot")
pop-location
#Move logfile directories
#%windir%\system32\inetsrv\appcmd set config -section:system.applicationHost/sites -siteDefaults.traceFailedRequestsLogging.directory:"%MOVETO%inetpub\logs\FailedReqLogFiles"
set-WebConfigurationProperty "/system.applicationHost/sites/siteDefaults" -name traceFailedRequestsLogging.directory -value $($Drive+":\inetpub\logs\FailedReqLogFiles")
#%windir%\system32\inetsrv\appcmd set config -section:system.applicationHost/sites -siteDefaults.logfile.directory:"%MOVETO%inetpub\logs\logfiles"
set-WebConfigurationProperty "/system.applicationHost/sites/siteDefaults" -name logfile.directory -value $($Drive+":\inetpub\logs\logfiles")
#%windir%\system32\inetsrv\appcmd set config -section:system.applicationHost/log -centralBinaryLogFile.directory:"%MOVETO%inetpub\logs\logfiles"
set-WebConfigurationProperty -pspath 'MACHINE/WEBROOT/APPHOST' -filter "system.applicationHost/log" -name centralBinaryLogFile.directory -value $($Drive+":\inetpub\logs\logfiles")
#%windir%\system32\inetsrv\appcmd set config -section:system.applicationHost/log -centralW3CLogFile.directory:"%MOVETO%inetpub\logs\logfiles"
set-WebConfigurationProperty -pspath 'MACHINE/WEBROOT/APPHOST' -filter "system.applicationHost/log" -name centralW3CLogFile.directory -value $($Drive+":\inetpub\logs\logfiles")
#%windir%\system32\inetsrv\appcmd set config -section:system.applicationHost/sites -siteDefaults.ftpServer.logFile.directory:"%MOVETO%inetpub\logs\logfiles"
set-WebConfigurationProperty "/system.applicationHost/sites/siteDefaults" -name ftpServer.logfile.directory -value $($Drive+":\inetpub\logs\LogFiles")
#%windir%\system32\inetsrv\appcmd set config -section:system.ftpServer/log -centralLogFile.directory:"%MOVETO%inetpub\logs\logfiles"
set-WebConfigurationProperty "/system.ftpServer/log" -name centralLogFile.directory -value $($Drive+":\inetpub\logs\LogFiles")
#REM Move config history location, temporary files, the path for the Default Web Site and the custom error locations
#%windir%\system32\inetsrv\appcmd set config -section:system.applicationhost/configHistory -path:%MOVETO%inetpub\history
set-WebConfigurationProperty "/system.applicationhost/configHistory" -name path -value $($Drive+":\inetpub\history")
#%windir%\system32\inetsrv\appcmd set config -section:system.webServer/asp -cache.disktemplateCacheDirectory:"%MOVETO%inetpub\temp\ASP Compiled Templates"
set-WebConfigurationProperty "system.webServer/asp" -name cache.disktemplateCacheDirectory -value $($Drive+":\inetpub\temp\ASP Compiled Templates")
#%windir%\system32\inetsrv\appcmd set config -section:system.webServer/httpCompression -directory:"%MOVETO%inetpub\temp\IIS Temporary Compressed Files"
set-WebConfigurationProperty "system.webServer/httpCompression" -name directory -value $($Drive+":\inetpub\temp\IIS Temporary Compressed Files")
#%windir%\system32\inetsrv\appcmd set vdir "Default Web Site/" -physicalPath:%MOVETO%inetpub\wwwroot
set-ItemProperty 'IIS:\Sites\Default Web Site\' -Name physicalPath -Value $($Drive+":\inetpub\wwwroot")
#%windir%\system32\inetsrv\appcmd set config -section:httpErrors /[statusCode='401'].prefixLanguageFilePath:%MOVETO%inetpub\custerr
set-WebConfiguration -Filter "/System.WebServer/HttpErrors/Error[@StatusCode='401']" -Value @{PrefixLanguageFilePath=$($Drive+":\inetpub\custerr")}
#%windir%\system32\inetsrv\appcmd set config -section:httpErrors /[statusCode='403'].prefixLanguageFilePath:%MOVETO%inetpub\custerr
set-WebConfiguration -Filter "/System.WebServer/HttpErrors/Error[@StatusCode='403']" -Value @{PrefixLanguageFilePath=$($Drive+":\inetpub\custerr")}
#%windir%\system32\inetsrv\appcmd set config -section:httpErrors /[statusCode='404'].prefixLanguageFilePath:%MOVETO%inetpub\custerr
set-WebConfiguration -Filter "/System.WebServer/HttpErrors/Error[@StatusCode='404']" -Value @{PrefixLanguageFilePath=$($Drive+":\inetpub\custerr")}
#%windir%\system32\inetsrv\appcmd set config -section:httpErrors /[statusCode='405'].prefixLanguageFilePath:%MOVETO%inetpub\custerr
set-WebConfiguration -Filter "/System.WebServer/HttpErrors/Error[@StatusCode='405']" -Value @{PrefixLanguageFilePath=$($Drive+":\inetpub\custerr")}
#%windir%\system32\inetsrv\appcmd set config -section:httpErrors /[statusCode='406'].prefixLanguageFilePath:%MOVETO%inetpub\custerr
set-WebConfiguration -Filter "/System.WebServer/HttpErrors/Error[@StatusCode='406']" -Value @{PrefixLanguageFilePath=$($Drive+":\inetpub\custerr")}
#%windir%\system32\inetsrv\appcmd set config -section:httpErrors /[statusCode='412'].prefixLanguageFilePath:%MOVETO%inetpub\custerr
set-WebConfiguration -Filter "/System.WebServer/HttpErrors/Error[@StatusCode='412']" -Value @{PrefixLanguageFilePath=$($Drive+":\inetpub\custerr")}
#%windir%\system32\inetsrv\appcmd set config -section:httpErrors /[statusCode='500'].prefixLanguageFilePath:%MOVETO%inetpub\custerr
set-WebConfiguration -Filter "/System.WebServer/HttpErrors/Error[@StatusCode='500']" -Value @{PrefixLanguageFilePath=$($Drive+":\inetpub\custerr")}
#%windir%\system32\inetsrv\appcmd set config -section:httpErrors /[statusCode='501'].prefixLanguageFilePath:%MOVETO%inetpub\custerr
set-WebConfiguration -Filter "/System.WebServer/HttpErrors/Error[@StatusCode='501']" -Value @{PrefixLanguageFilePath=$($Drive+":\inetpub\custerr")}
#%windir%\system32\inetsrv\appcmd set config -section:httpErrors /[statusCode='502'].prefixLanguageFilePath:%MOVETO%inetpub\custerr
set-WebConfiguration -Filter "/System.WebServer/HttpErrors/Error[@StatusCode='502']" -Value @{PrefixLanguageFilePath=$($Drive+":\inetpub\custerr")}
}
End
{
#Start the Services again
start-service iisadmin
start-service W3SVC
start-service w3logsvc
<#
echo Moved IIS7 root directory from %systemdrive%\ to %MOVETO%.
echo.
echo Please verify if the move worked.
echo If something went wrong you can restore the old settings via
echo "APPCMD restore backup beforeRootMove"
echo and
echo "REG delete HKLM\System\CurrentControlSet\Services\WAS\Parameters\ConfigIsolationPath"
echo You also have to reset the PathWWWRoot and PathFTPRoot registry values
echo in HKEY_LOCAL_MACHINE\Software\Microsoft\InetStp.
echo ===============================================================================
#>
}
Espero que os sirva